| Flash在3D应用领域非常广阔,使用Flash可以很轻松的做出一些精彩奇妙的3D特效,而且许多效果可以响应鼠标的动作,此实例就是一个鼠标3D感应的效果,通过移动鼠标,可以影响影片中的3D小球,最终效果如图1所示:
图1 最终效果
1.启动Flash,新建一个影片,设置影片的舞台大小为250px*250px(单位为象素),设置影片的背景颜色为黑色.
2.新建一个影片剪辑元件,命名为Ball,进入元件的编辑区后,使用椭圆工具绘制一个正圆,然后打开混色器面板,在面板中设置填充类型为放射渐变,分别设置色带下左右两个色块的颜色,如图2所示:
图2 设置填充色
其中左边色块的RGB颜色代码为(103,152,116),右边色块的RGB颜色代码为(0,0,0),小球填充后的效果如图3所示:
图3 填充颜色后的小球
3.新建一个影片剪辑元件,命名为Point,进入元件的编辑区后,从库中将元件Ball拖到编辑区中,然后在属性面板中给其设置实例名为bLur,如图4所示;
图4 给小球设置实例名
4.还是新建一个影片剪辑元件,命名为Balls,进入元件的编辑区后,将影片默认的图层重命名为Point,然后将元件Point拖到编辑区中,同时在属性面板中设置其实例名为Point,如图5所示;
图5 设置实例名Point
在上面新建一个图层Actions,用来设置控制影片的Action动作脚本.
给第1帧添加如下Action:
x1 = "0"
y1 = "0";
z1 = "50";
x2 = "0";
y2 = "0";
z2 = "-50";
x3 = ".1";
y3 = ".1";
z3 = ".1";
x4 = "0";
y4 = "0";
z4 = "-100";
x5 = "-50";
y5 = "-50";
z5 = "50";
x6 = "50";
y6 = "-50";
z6 = "50";
x7 = "50";
y7 = "50";
z7 = "50";
x8 = "-50";
y8 = "50";
z8 = "50";
d = "900";
z0 = "1000";
i = "1";
while (Number(i)<9) {
duplicateMovieClip("point", "point" add i, 20-(i*2));
set("zsort" add i, i);
i = Number(i)+1;
}
给第2帧添加如下Action:
yangle = int(/:yangle);
xangle = int(/:xangle);
i = "1";
while (Number(i)<9) {
cosYangle = eval ( "/:cos" add yangle );
sinYangle = eval ( "/:sin" add yangle );
cosXangle = eval ( "/:cos" add xangle );
sinXangle = eval ( "/:sin" add xangle );
zpos = eval("z" add i);
xpos = eval("x" add i);
ypos = eval("y" add i);
tempz = ((eval("z" add i) ) * cosYangle ) - ( eval ("x" add i) * sinYangle );
set("x" add i, Number((zpos*sinYangle))+Number((xpos*cosYangle)));
set("z" add i, Number(((ypos)*sinXangle))+Number((tempz*cosXangle)));
set("y" add i, ((ypos)*cosXangle)-(tempz*sinXangle));
scalar = 1/ ( ((eval ("z" add i))/d)+1 );
set("xp" add i, ((eval("x" add i) * scalar) + 00));
set("yp" add i, ((eval("y" add i) * scalar) + 00));
set("unseen" add i, true);
i = Number(i)+1;
}
n = "2";
while ((Number(n)<9)) {
i = 8;
dummy = "nada";
while (Number(i)>=Number(n)) {
if (eval ("z" add eval("zsort" add (i-1))) > eval ("z" add eval("zsort" add i))) {
dummy = eval("zsort" add (i-1));
set("zsort" add (i-1), eval("zsort" add i));
set("zsort" add i, dummy);
}
i = i-1;
}
if (dummy eq "nada") {
n = 9;
}
n = Number(n)+1;
}
i = "1";
while (Number(i)<9) {
/:blur = int (15 - (eval( "z" add eval ("zsort" add i) )/5));
tellTarget ("point" add i add "/blur") {
gotoAndStop(/:blur);
}
setProperty("point" add i, _xscale, 100 - ((eval( "z" add eval ("zsort" add i))) /5));
setProperty("point" add i, _yscale, 100 - ((eval( "z" add eval ("zsort" add i))) /5));
setProperty("point" add i, _x, eval( "xp" add eval ("zsort" add i) ));
setProperty("point" add i, _y, eval( "yp" add eval ("zsort" add i) ));
i = Number(i)+1;
}
给第3帧添加如下Action:
gotoAndPlay(2);
最后时间轴如图6所示:
图6 元件Balls的时间轴窗口
|
